Vision F1 / Flip Chip Convertor

When we introduced the Vision F1, we introduced the first Flip Chip dropout system to the BMX world so that you can run Disc Brakes without damaging the BMX frame, ,and we also made it where you could have multiple wheelbases. 

In doing this, we added the idler to the Vision F1 and have come out with the Fixed Idler that comes stock with the Vision F1, and we have also made the Team Edition Spring Loaded Idler. Which is the easiest and fastest way to set your gearing and keep your axle fixed. 

But some people still insist there is too much drag on the idler even though you have 6 different spring settings and a Delrin Chain Guide block so you can keep your drive train spinning forever. 

So we have seen people modify their Vision F1 to use a slotted axle, but then you are limited on the Disc Brake system and you damage the carbon. 

With the Flip / Chip convertor, you get the Flip Chips with full dropout adjustment, a built in chain tensioner system so you don't damage your frame, and a slotted Post Mount Disk Brake Adapter. So that you can set your axle position and tension without the idler. 

Works on ALL Vision F1's and Vision RSX BMX Race Frames. 

Black Anodized

Contains -

1.  1-pc Slotted Disc Brake Arm w/ built in Tensioner
2.  2-pc Slotted Flip Chip
3.  1-pc Inner Drive side Tensioner
4.  2-Chain Tensioner Bolts
5.  2-Chain Tensioner Ball Ends
6.  1-pc Disc Brake Arm Spacer
7.  2-pcs Disc Brake Mount Bolts 1/ washer
   
   Available in 15mm or 10mm ( 3/8" ) Sizes